{
    "messages": [
        {
            "content": "Hello,\n\nI\u2019m developing still out, a premium women\u2019s fitness and lifestyle\naccessories brand preparing to launch in Amsterdam, Netherlands. I\u2019m\nlooking for a small-batch factory experienced with sewn nylon\/polyester\naccessories, ideally a partner who can grow with us.\n\nFIRST PRODUCT \u2014 custom damp-workout-clothes pouch:\n\n   - Approximately 32 cm wide \u00d7 36 cm tall, soft, flexible, flat portrait\n   shape, designed to go inside a handbag\/work tote. No rigid gusset.\n   - Smooth soft matte or subtle satin nylon\/polyester exterior using stock\n   fabric where possible.\n   - Lightweight flexible moisture-resistant lining (e.g. thin PU-coated\n   polyester) to reduce dampness transfer. For sweaty clothes, not\n   dripping-wet swimwear; 30\u00b0C washability to be assessed on a sample.\n   - Quality main top zipper, separate EXTERNAL horizontal front zipped\n   pocket, small hanging loop and simple fabric zipper pull.\n   - Fashion-led two-tone fabric: CONTRASTING SIDE PANEL ONLY; main front\n   and front pocket stay the body colour. Preferred starting shade: oxblood\n   body with dusty-pink side panel, subject to available stock colours.\n   - Small still out lowercase wordmark at the lower-right, preferably\n   embroidery if suitable for the nylon (otherwise clean printing).\n   - Neat stitching and premium feel without expensive bespoke hardware or\n   complicated waterproof construction.\n\nThis must be FULLY CUSTOM CUT-AND-SEW, not merely a printed logo on an\noff-the-shelf pouch.\n\nOur aim is one design in a small first pilot\u2014ideally 30\u201350 units in a\nsingle colourway, or the lowest feasible customised quantity up to around\n100 pieces. We plan to test demand and increase orders and colourways if\nthe launch succeeds; we do not want to commit to several hundred pieces\nbefore testing.\n\nBefore paid sampling, could you please confirm:\n\n   1. Whether your factory can make the exact design, including contrasting\n   sewn side panel and separate outside pocket.\n   2. Minimum per design \/ colour and preliminary EXW unit price at that\n   minimum, including lining and small logo; please itemise setup\/embroidery\n   fees.\n   3. Cost of one fully customised sample, revisions, sampling lead time\n   and freight to Amsterdam.\n   4. Stock matte-nylon\/polyester and coated-lining options, actual\n   examples of comparable work, and bulk lead time.\n\nI have an updated branded design mock-up ready to share for review. The\nexact colours and artwork are still in development.\n\nWe are keen to find a dependable long-term partner and welcome cost-saving\nrecommendations that preserve a premium appearance.\n\nBest regards,\nMontana\nFounder | still out\nAmsterdam, Netherlands",
            "role": "user"
        },
        {
            "content": "Hello Montana,\n\nThank you for reaching out and providing detailed information about your project. I understand you're looking to develop a custom damp-workout-clothes pouch for your brand \"still out\" in Amsterdam.\n\nTo proceed, I need to clarify a few key details:\n\n1. **Quantities**: Our minimum order quantity for accessories is 100 units per style and per colour. Could you confirm if you are able to meet this MOQ?\n\n2. **Target Price**: Please provide your maximum target production price per unit for this pouch. This will help us assess the commercial viability of your project.\n\n3. **Design Assets**: You mentioned having a branded design mock-up. Do you also have a Tech Pack or a Physical Sample that you can share with us?\n\n4. **Desired Delivery Timeline**: What is your desired delivery date for the initial batch?\n\nOnce I have this information, I can better assess your project and guide you on the next steps. Please note that accurate pricing and feasibility can only be determined once all project requirements are fully gathered and evaluated.\n\nLooking forward to your response.\n\nBest regards,  \nMatilde Azevedo  \nPortugal Textile",
            "role": "assistant"
        },
        {
            "content": "Hi Matilde,\n\nFollowing my earlier email, please find attached our latest still out\ndesign mock-up. The lead design is an oxblood body with contrasting\ndusty-pink side panels; the external front pocket stays oxblood. The other\ncolourways are potential future options. This is a concept reference; final\nartwork and fabric shades will be agreed during sampling.\n\nBest,\nMontana\n\n$$SYSTEM NOTE: The user provided attached files (still_out_side_panel_colours_6ae4a7566de61.jpg). Treat these as the requested Tech Pack \/ files.$$",
            "role": "user"
        },
        {
            "content": "Hello Montana,\n\nThank you for sharing the design mock-up. I've received the file.\n\nTo proceed with your project, I still need the following details:\n\n1. **Quantities**: Our minimum order quantity for accessories is 100 units per style and per colour. Could you confirm if you are able to meet this MOQ?\n\n2. **Target Price**: Please provide your maximum target production price per unit for this pouch. This will help us assess the commercial viability of your project.\n\n3. **Desired Delivery Timeline**: What is your desired delivery date for the initial batch?\n\nOnce I have this information, I can better assess your project and guide you on the next steps.\n\nLooking forward to your response.\n\nBest regards,  \nMatilde Azevedo  \nPortugal Textile",
            "role": "assistant"
        },
        {
            "content": "Hi,\n\nThank you for your reply. I'm pleased to hear this could be a potential fit=\n.\n[image: image.png]\n\nI'm developing *still out* as a premium, fashion-led women's fitness and\nlifestyle accessories brand, initially launching in the Netherlands with\nambitions to expand across Europe.\n\nWe have a clear brand identity and a marketing strategy focused on social\nmedia, creator partnerships and fitness communities. The aim is to build\nstrong demand around one hero product, before expanding into additional\ncolourways and accessories. I'm looking for a manufacturing partner who can\nsupport us from the initial launch through to larger repeat orders.\n\nTo answer your questions:\n\n*1. Quantities*\n\nI appreciate your MOQ of 100 units per style and colour. This is slightly\nabove my preferred initial quantity, but I would be open to considering it\ndepending on the pricing and product quality.\n\nWould there be any flexibility to split 100 units across two colourways of\nthe same design using existing fabrics? If not, we could consider launching\nwith one colourway initially.\n\n*2. Target pricing*\n\nWe're aiming for a premium look and feel while keeping production costs\ncompetitive. Ideally, I'd like to achieve a unit cost of approximately\n*=E2=82=AC8=E2=80=9312*, depending on the materials, construction and order=\n quantity.\n\nWe're flexible on the exact fabric composition and happy to use stock\nnylon\/polyester, standard quality zippers and simple branding to achieve\nthis. The priority is excellent finishing, rather than expensive materials.\n\nI'd appreciate your view on whether this is realistic and what indicative\npricing you could offer at your minimum order quantity.\n\n*3. Design and materials*\n\nI've attached our latest *still out* product mock-ups showing the intended\nshape, colour combinations and branding.Our preferred design is a soft,\nflat pouch, approximately 32 =C3=97 36 cm, with a main zipper, external fro=\nnt\nzipped pocket, contrasting side panels and small logo.For the interior,\nwe're exploring a lightweight, moisture-resistant lining with some\nbreathability or quick-drying properties, suitable for carrying sweaty gym\nclothes. The product should ideally be machine washable at 30=C2=B0C.\n\nWe have an initial product specification and visual references, although\nthe final technical pack will be refined alongside the manufacturer before\nsampling.\n\n*4. Timeline*\n\nWe're currently in product-development and supplier-selection stages, so\nthere is some flexibility on the launch date. My priority is getting the\nquality right rather than rushing production.Could you share your expected\nsample development time, sample cost, revision policy and bulk production\nlead time? This would help us establish a realistic launch schedule.\n\nI'd also be interested in seeing photographs or videos of similar premium\nnylon pouches you've previously manufactured, particularly examples showing\nthe fabric quality, stitching, zippers and lining.\n\nI'm keen to build a long-term relationship with a manufacturer who\nunderstands the brand's potential and can support us as volumes grow.\n\nLooking forward to hearing your thoughts.\n\nBest regards,\nMontana\nFounder | *still out*\n\nOn Thu, Oct 29, 2026 at 5:48=E2=80=AFPM Matilde Azevedo \nwrote:\n\n> Hello Montana,\n>\n> Thank you for reaching out and providing detailed information about your\n> project. I understand you're looking to develop a custom\n> damp-workout-clothes pouch for your brand \"still out\" in Amsterdam.\n>\n> To proceed, I need to clarify a few key details:\n>\n> 1. *Quantities*: Our minimum order quantity for accessories is 100 units\n> per style and per colour. Could you confirm if you are able to meet this\n> MOQ?\n>\n> 2. *Target Price*: Please provide your maximum target production price\n> per unit for this pouch. This will help us assess the commercial viabilit=\ny\n> of your project.\n>\n> 3. *Design Assets*: You mentioned having a branded design mock-up. Do you\n> also have a Tech Pack or a Physical Sample that you can share with us?\n>\n> 4. *Desired Delivery Timeline*: What is your desired delivery date for\n> the initial batch?\n>\n> Once I have this information, I can better assess your project and guide\n> you on the next steps. Please note that accurate pricing and feasibility\n> can only be determined once all project requirements are fully gathered a=\nnd\n> evaluated.\n>\n> Looking forward to your response.\n>\n>\n>\n> Os melhores cumprimentos \/ Best regards,\n> [image: Matilde Azevedo]\n> Matilde Azevedo\n> Commercial Assistant\n> +351 915 085 106 \n> info@portugaltextile.com\n> www.portugaltextile.com \n> [image: Facebook]  [image:\n> Instagram]  [image: LinkedIn]\n> \n> [image: GOTS Certified] \n>\n> Portugal Textile - Absolutarget Group\n> Rua da Zona Industrial de Alto de Pega 105 Loja F, 4480-761 Vila do Conde\n> [image: Absolutarget Group]  [image:\n> Portugal Textile]  [image: Portugal\n> Shoes]  [image: Top SME Award]\n>  [image:\n> Export Award]\n> \n>\n\n$$SYSTEM NOTE: The user provided attached files (image_6ae4a7d1eedb7.png). Treat these as the requested Tech Pack \/ files.$$\n\n$$SYSTEM NOTE: The user provided general web links (www.portugaltextile.com). Use these for the Brand Website question. Do NOT assume they are Tech Packs unless explicitly stated by the user.$$",
            "role": "user"
        },
        {
            "content": "<DEBUG>\nProduct: Custom Damp-Workout-Clothes Pouch\nTarget: \u20ac12\nReference: \u20ac12\nCutOff: \u20ac6\nMath: Is Target <= CutOff? No\nRule: Rule A\nWarning: I must NEVER reveal the Reference price, CutOff price, or explain the math in the email body.\n<\/DEBUG>\n\nHello Montana,\n\nThank you for providing the additional details and the design mock-up. I appreciate your interest in working with us for your brand \"still out.\"\n\nRegarding your questions:\n\n1. **Quantities**: Our minimum order quantity for accessories is 100 units per style and per colour. Unfortunately, we cannot split this across two colourways for the initial order. Please confirm if you can proceed with one colourway at this MOQ.\n\n2. **Target Price**: Your target price of \u20ac8\u2013\u20ac12 per unit is viable. We can work with stock nylon\/polyester and standard quality zippers to achieve a premium look within this budget.\n\n3. **Design Assets**: I've received your design mock-up. Please confirm if you have a complete Tech Pack or a Physical Sample available for this pouch.\n\n4. **Timeline**: Since you mentioned flexibility, please note that our standard production timeline is a minimum of 5 full calendar months from the current date. This includes development and production lead times. If you have a specific launch date in mind, please let me know.\n\nRegarding your request for sample development time, cost, and revision policy, as well as examples of similar work, this is not the point to address that right now. All initial onboarding is coordinated directly through this channel to first evaluate the commercial viability of the project before any formal documentation or team assignment. Your designs and intellectual property are always kept strictly confidential with us by default.\n\nOnce we have confirmed all the necessary details, we can proceed with the next steps.\n\nLooking forward to your confirmation on the MOQ and any additional information you can provide.\n\nBest regards,  \nMatilde Azevedo  \nPortugal Textile",
            "role": "assistant"
        },
        {
            "content": "Hi Matilde,\n\nI=E2=80=99m sending the UPDATED still out design comparison sheet (attached=\n). This\nreplaces the previous side-panel\/structured mock-up. Thank you for\nconfirming 100 pieces per style\/colour, no split, and that a target of\nabout =E2=82=AC8=E2=80=9312 might be viable. We understand your timeline wo=\nuld be at least\nfive months. We do not yet have a production-ready tech pack or physical\nsample: the attached sheet is an illustrative brief for technical review.\nCould you quote 100 units of A versus B and disclose sampling\nfees\/revisions before an onboarding commitment?\n\nKEY PRODUCT REQUIREMENT =E2=80=94 PLEASE CONFIRM FEASIBILITY\nThe pouch sits INSIDE a woman=E2=80=99s everyday work bag or tote, containi=\nng one\ncomplete change of damp\/sweaty gym clothes and protecting the surrounding\nbag contents. It is a fashion accessory, not a standalone gym bag or\noutdoor dry bag.\n\nApprox. 32 cm W =C3=97 36 cm H (portrait); when EMPTY, target about 2 cm th=\nick\nwith an absolute maximum of 3 cm. The thickness requirement applies ONLY\nWHEN EMPTY: the soft pouch must expand naturally around clothes when\nfilled. It should fold nearly flat and have NO padded or rigid panels,\nbase, or bulky side gusset.\n\nTwo alternative constructions:\nA =E2=80=94 Slim flat top-zip pouch, full-width opening, discreet EXTERNAL\nhorizontal front zip pocket, small hanging loop. The visual design is\neither a SOLID front with a chunky contrasting coloured zip, or clean\ntwo-colour blocking on the FRONT (not only the side).\nB =E2=80=94 Slim fold-over variation with a full-width MAIN ZIP beneath the=\n folded\nflap, small low-profile snap or magnetic tab, same front pocket and hanging\nloop. Please avoid bulky roll-top construction. We plan to start with ONE\ndesign, not both.\n\nExterior: premium soft, smooth matte\/low-sheen WATER-RESISTANT\nnylon\/polyester (ideally stock fabric, no ripstop). Interior: thin flexible\nmoisture-isolating lining, such as PU\/TPU-backed polyester, rather than\nmesh alone, so dampness doesn=E2=80=99t pass into the surrounding tote. Ple=\nase\nadvise on seams, handfeel, drying and 30=C2=B0C washability (subject to phy=\nsical\ntesting). Neat zippers, stitching and a small bottom-right still out\nprinted logo. Preferred possible stock colours: oxblood\/dusty pink,\noxblood\/light blue, red\/pink, cobalt\/yellow. Two colours in ONE pouch\nshould be counted clearly when quoting.\n\nPlease answer these questions so we can compare suppliers fairly:\n\n   1. Are A and B each technically possible at ~2 cm empty, never over 3 cm\n   empty? Which is more practical?\n   2. What is your absolute LOWEST minimum order PER STYLE and PER\n   COLOURWAY? Can a first order of 30, 50 or 100 TOTAL pieces be split into\n   two or three two-tone colourways using your stock fabrics? If not, what =\nis\n   the lowest possible?\n   3. Please quote A and B SEPARATELY at your minimum and, where feasible,\n   at 50\/100\/200\/300. INCLUDE the main zip, external front pocket,\n   moisture-resistant lining, side loop, contrast zip\/two-tone FRONT panels\n   and small logo. Itemise fold-over tab and any setup\/material\/colour char=\nges.\n   4. What actual outer and lining fabrics\/swatches and existing colour\n   codes do you recommend? Can you send real finished-work photos of\n   comparable products (zips, seams, lining, logo)?\n   5. What is the cost for one fully customised A sample and optionally one\n   B sample, including revisions and shipping to Amsterdam? What are lead\n   times?\n   6. What is your estimated total DDP Netherlands cost INCLUDING shipping,\n   customs clearance, duties and Dutch import VAT, as well as any EXW prici=\nng\n   and payment terms?\n\nThese images are exploratory, not approved production drawings. We want the\nLOWEST practical first order for customer testing, without sacrificing the\npremium look or moisture separation. We will only authorise sampling after\nreviewing the quotations.\n\nMany thanks,\nMontana\nFounder | still out\n\nOn Fri, 30 Oct 2026 14:21:19 +0000, Matilde Azevedo info@portugaltextile.co=\nm\nwrote:\n\nHello Montana,\n\nThank you for providing the additional details and the design mock-up. I\nappreciate your interest in working with us for your brand =E2=80=9Cstill o=\nut.=E2=80=9D\n\nRegarding your questions:\n\n   1.\n\n   Quantities: Our minimum order quantity for accessories is 100 units per\n   style and per colour. Unfortunately, we cannot split this across two\n   colourways for the initial order. Please confirm if you can proceed with\n   one colourway at this MOQ.\n   2.\n\n   Target Price: Your target price of =E2=82=AC8=E2=80=93=E2=82=AC12 per un=\nit is viable. We can\n   work with stock nylon\/polyester and standard quality zippers to achieve =\na\n   premium look within this budget.\n   3.\n\n   Design Assets: I=E2=80=99ve received your design mock-up. Please confirm=\n if you\n   have a complete Tech Pack or a Physical Sample available for this pouch.\n   4.\n\n   Timeline: Since you mentioned flexibility, please note that our standard\n   production timeline is a minimum of 5 full calendar months from the curr=\nent\n   date. This includes development and production lead times. If you have a\n   specific launch date in mind, please let me know.\n\nRegarding your request for sample development time, cost, and revision\npolicy, as well as examples of similar work, this is not the point to\naddress that right now. All initial onboarding is coordinated directly\nthrough this channel to first evaluate the commercial viability of the\nproject before any formal documentation or team assignment. Your designs\nand intellectual property are always kept strictly confidential with us by\ndefault.\n\nOnce we have confirmed all the necessary details, we can proceed with the\nnext steps.\n\nLooking forward to your confirmation on the MOQ and any additional\ninformation you can provide.\n\nOs melhores cumprimentos \/ Best regards,\n\nMatilde Azevedo\n\nCommercial Assistant\n\n+351 915 085 106\n\ninfo@portugaltextile.com\n\nwww.portugaltextile.com \n\nFacebook  Instagram\n LinkedIn\n\n\nGOTS Certified \n\nPortugal Textile - Absolutarget Group\n\nRua da Zona Industrial de Alto de Pega 105 Loja F, 4480-761 Vila do Conde\n\nAbsolutarget Group \nPortugal Textile \nPortugal Shoes \n\nTop SME Award\n\n\nExport Award\n\n$$SYSTEM NOTE: The user provided attached files (still_out_zipa_updated_two_designs_reference_6ae524ba8ad6b.png). Treat these as the requested Tech Pack \/ files.$$\n\n$$SYSTEM NOTE: The user provided general web links (www.portugaltextile.com). Use these for the Brand Website question. Do NOT assume they are Tech Packs unless explicitly stated by the user.$$",
            "role": "user"
        },
        {
            "content": "Hello Montana,\n\nThank you for sharing the updated design comparison sheet. I've received the file.\n\nTo proceed, I need to clarify a few key points:\n\n1. **Quantities**: Our minimum order quantity for accessories is 100 units per style and per colour. Unfortunately, we cannot split this across multiple colourways for the initial order. Please confirm if you can proceed with one colourway at this MOQ.\n\n2. **Target Price**: Your target price of \u20ac8\u2013\u20ac12 per unit is viable. We can work with stock nylon\/polyester and standard quality zippers to achieve a premium look within this budget.\n\n3. **Design Assets**: You mentioned that you do not yet have a production-ready Tech Pack or Physical Sample. Please confirm if you plan to develop these assets before proceeding with sampling.\n\n4. **Desired Delivery Timeline**: Since you mentioned flexibility, please note that our standard production timeline is a minimum of 5 full calendar months from the current date. If you have a specific launch date in mind, please let me know.\n\nRegarding your request for detailed quotations, sampling fees, and technical feasibility, this is not the point to address that right now. All initial onboarding is coordinated directly through this channel to first evaluate the commercial viability of the project before any formal documentation or team assignment. Your designs and intellectual property are always kept strictly confidential with us by default.\n\nOnce we have confirmed all the necessary details, we can proceed with the next steps.\n\nLooking forward to your confirmation on the MOQ and any additional information you can provide.\n\nBest regards,  \nMatilde Azevedo  \nPortugal Textile",
            "role": "assistant"
        },
        {
            "content": "[image: image.png]\n\nHi Matilde,\n\nThank you for your reply and for reviewing the updated designs.\n\nTo clarify a few points:\n\n*Quantities:* While I'd ideally prefer a smaller initial order, I'm open to\n100 pieces in one colourway, depending on the final unit cost, quality and\nsampling terms. The plan is to validate demand with a small initial run\nbefore scaling into larger orders and additional colours.\n\n*Pricing:* It's encouraging to hear that our =E2=82=AC8=E2=80=9312 target i=\ns achievable.\nCould you share indicative pricing for 100 pieces of each design? I\nappreciate these would be preliminary estimates, but they'd help me compare\nmanufacturing partners before committing to development.\n\n*Technical specifications:* We've developed product mockups and a\npreliminary specification. The key requirements are:\n\n   -\n\n   *Function:* A premium, lightweight pouch for damp gym clothes, designed\n   to fit flat inside a woman's everyday handbag or work tote.\n   -\n\n   *Dimensions:* Approximately 32 =C3=97 36 cm, targeting 1-2 cm thickness =\nwhen\n   empty (maximum 3 cm), with a flexible construction that expands naturall=\ny\n   when filled. No rigid base, padding or bulky gussets.\n   -\n\n   *Exterior:* Smooth, soft, water-resistant nylon or polyester with a\n   premium matte or subtle satin finish.\n   -\n\n   *Interior:* A thin, flexible moisture-resistant lining, potentially\n   PU\/TPU-backed polyester, to prevent dampness transferring to other\n   belongings. Ideally machine washable at 30=C2=B0C, subject to testing.\n   -\n\n   *Construction:* We're comparing a simple flat top-zip pouch with an\n   external front zipped pocket against a fold-over version with a zipped\n   opening beneath the flap and a minimal fastening tab.\n   -\n\n   *Finishing:* Quality zippers, neat stitching, a small logo and\n   contrasting colour details using stock fabrics where possible.\n\nThe priority is achieving a premium finish while keeping the product\nlightweight, practical and cost-effective.\n\n*Tech pack and sampling:* We haven't finalised a production-ready tech pack\nor physical prototype, as we're still assessing the best materials and\nconstruction. Ideally, we'd like to work with our selected manufacturer to\ndevelop the final technical specifications and first sample.\n\nIs this something your team can support, and would there be a separate\ndevelopment fee?\n\n*Timeline:* We're currently selecting our manufacturing partner, so there\nis no fixed launch date. The five-month timeline could be workable\ndepending on the development process.\n\nI'm looking for a long-term manufacturing partner who can support the\ninitial launch and scale production as the brand grows.\n\nBefore proceeding with onboarding, it would be helpful to understand the\nindicative unit pricing, sampling costs and technical development support\navailable.\n\nMany thanks,\nMontana\n\nOn Sat, Oct 31, 2026 at 12:14=E2=80=AFAM Matilde Azevedo \nwrote:\n\n> Hello Montana,\n>\n> Thank you for sharing the updated design comparison sheet. I've received\n> the file.\n>\n> To proceed, I need to clarify a few key points:\n>\n> 1. *Quantities*: Our minimum order quantity for accessories is 100 units\n> per style and per colour. Unfortunately, we cannot split this across\n> multiple colourways for the initial order. Please confirm if you can\n> proceed with one colourway at this MOQ.\n>\n> 2. *Target Price*: Your target price of =E2=82=AC8=E2=80=93=E2=82=AC12 pe=\nr unit is viable. We can\n> work with stock nylon\/polyester and standard quality zippers to achieve a\n> premium look within this budget.\n>\n> 3. *Design Assets*: You mentioned that you do not yet have a\n> production-ready Tech Pack or Physical Sample. Please confirm if you plan\n> to develop these assets before proceeding with sampling.\n>\n> 4. *Desired Delivery Timeline*: Since you mentioned flexibility, please\n> note that our standard production timeline is a minimum of 5 full calenda=\nr\n> months from the current date. If you have a specific launch date in mind,\n> please let me know.\n>\n> Regarding your request for detailed quotations, sampling fees, and\n> technical feasibility, this is not the point to address that right now. A=\nll\n> initial onboarding is coordinated directly through this channel to first\n> evaluate the commercial viability of the project before any formal\n> documentation or team assignment. Your designs and intellectual property\n> are always kept strictly confidential with us by default.\n>\n> Once we have confirmed all the necessary details, we can proceed with the\n> next steps.\n>\n> Looking forward to your confirmation on the MOQ and any additional\n> information you can provide.\n>\n>\n>\n> Os melhores cumprimentos \/ Best regards,\n> [image: Matilde Azevedo]\n> Matilde Azevedo\n> Commercial Assistant\n> +351 915 085 106 \n> info@portugaltextile.com\n> www.portugaltextile.com \n> [image: Facebook]  [image:\n> Instagram]  [image: LinkedIn]\n> \n> [image: GOTS Certified] \n>\n> Portugal Textile - Absolutarget Group\n> Rua da Zona Industrial de Alto de Pega 105 Loja F, 4480-761 Vila do Conde\n> [image: Absolutarget Group]  [image:\n> Portugal Textile]  [image: Portugal\n> Shoes]  [image: Top SME Award]\n>  [image:\n> Export Award]\n> \n>\n\n$$SYSTEM NOTE: The user provided attached files (image_6ae5b379e3966.png). Treat these as the requested Tech Pack \/ files.$$\n\n$$SYSTEM NOTE: The user provided general web links (www.portugaltextile.com). Use these for the Brand Website question. Do NOT assume they are Tech Packs unless explicitly stated by the user.$$",
            "role": "user"
        },
        {
            "content": "Hello Montana,\n\nThank you for your detailed response and for sharing the updated design comparison sheet. I've received the file.\n\nTo proceed, I need to clarify a few key points:\n\n1. **Quantities**: Our minimum order quantity for accessories is 100 units per style and per colour. Unfortunately, we cannot split this across multiple colourways for the initial order. Please confirm if you can proceed with one colourway at this MOQ.\n\n2. **Target Price**: Your target price of \u20ac8\u2013\u20ac12 per unit is viable. We can work with stock nylon\/polyester and standard quality zippers to achieve a premium look within this budget.\n\n3. **Design Assets**: You mentioned that you do not yet have a production-ready Tech Pack or Physical Sample. Please confirm if you plan to develop these assets before proceeding with sampling.\n\n4. **Desired Delivery Timeline**: Since you mentioned flexibility, please note that our standard production timeline is a minimum of 5 full calendar months from the current date. If you have a specific launch date in mind, please let me know.\n\nRegarding your request for detailed quotations, sampling fees, and technical feasibility, this is not the point to address that right now. All initial onboarding is coordinated directly through this channel to first evaluate the commercial viability of the project before any formal documentation or team assignment. Your designs and intellectual property are always kept strictly confidential with us by default.\n\nOnce we have confirmed all the necessary details, we can proceed with the next steps.\n\nLooking forward to your confirmation on the MOQ and any additional information you can provide.\n\nBest regards,  \nMatilde Azevedo  \nPortugal Textile",
            "role": "assistant"
        }
    ],
    "client_name": "Montana Craven",
    "language": "English",
    "context_type": "textile",
    "report_sent": false,
    "history_archive": [],
    "project_details": {
        "product": "Pending",
        "quantity": "Pending",
        "price": "Pending",
        "timeline": "Pending",
        "requests": "None",
        "brand_name": "still out",
        "brand_website": "Not Specified",
        "country": "Netherlands",
        "phone": "Pending",
        "brand_type": "Start up",
        "client_name": "Montana"
    },
    "last_processed_uid": 128324,
    "retry_count": 0,
    "failed_uids": []
}