{
    "messages": [
        {
            "content": "Hello Portugal Textile team,\n\n\n\nI'm Tai Bryan, founder of BRYA \u2014 a UK-based performance sportswear brand launching our debut collection (The Genesis Set) on\u00a017 October 2026. ExploreTex came up in our research as a strong fit for technical activewear production, which is why I'm reaching out.\n\n\n\nThe Genesis Set is 4 garments \u2014 men's tee + shorts, women's tee + shorts. Construction features I need a factory capable of:\n\n\n\n\u00a0 \u2022 Laser-cut micro-perforation across full-fabric panels (men's tee body) AND open-knit mesh panels (back, both tees)\n\n\u00a0 \u2022 Silicone rubber B-flap on the women's tee (3\u20134cm, embossed BRYA logo, top edge stitched only)\n\n\u00a0 \u2022 Flatlock stitching throughout, matte technical fabrics, raglan sleeves\n\n\u00a0 \u2022 4 launch colourways (2 menswear, 2 womenswear), Pantone-matched\n\n\n\nLaunch model: pre-order driven. 4 launch colourways across the 4 garments = 8 garment-colour combinations. Production targets 30\u201350 units per garment per colourway, completed early September.\n\n\n\nSample order: 2 units \u2014 1 men's performance tee and 1 women's cropped sculpt tee (testing both laser-cut perforation work and silicone B-flap construction). Full collection sample (shorts) at the chosen factory. A complete tech pack with fabric specs, GSM, graded measurements, BOM and Pantone references is ready to share.\n\n\n\nBefore I send the tech pack, could you please confirm:\n\n\n\n\u00a0 1. In-house laser cutting capability \u2014 full-fabric perforation AND mesh \u2014 or outsourced?\n\n\u00a0 2. Silicone rubber trim capability \u2014 in-house or partnered supplier?\n\n\u00a0 3. Sample MOQ, cost, and lead time\n\n\u00a0 4. Production MOQ and lead time at 30\u201350 units per style\/colour\n\n\u00a0 5. Indicative per-unit pricing at production volume\n\n\u00a0 6. Certifications held (OEKO-TEX, BSCI, WRAP, GOTS)\n\n\u00a0 7. Sample fee credited against first production order \u2014 yes\/no?\n\n\n\nHappy to share the tech pack and jump on a call this week if this looks like a fit.\n\n\n\nBest regards,\n\nTai Bryan\n\nFounder, BRYA\n\nmailto:hello@thisisbrya.com | +447852 575 419\n\n\n\n\n\nBRYA\n\n\nElevated performance wear\n\nDesigned for movement\n\n\n\nthisbrya.com",
            "role": "user"
        },
        {
            "content": "Hello Tai,\n\nThank you for contacting us. \n\nTo provide you with an accurate quotation for your project, I need the following details:\n\n1. Brand: Do you have an established brand? If so, please provide the Name and Website.\n2. Location: What is your country?\n3. Product Category: What type of product do you want to develop (e.g., T-shirts, Shorts, etc.)? This is essential to apply the correct minimums.\n4. Designs: Do you have a Tech Pack or a Physical Sample to send us?\n5. Quantities: What is the total quantity and how many styles?\n6. Timeline: What is your desired delivery date?\n7. Target Price: What is your target production price per style?\n\nOnce I have these details, I can better assess your project and guide you on the next steps. \n\nLooking forward to your response!",
            "role": "assistant"
        },
        {
            "content": "Hi Matilde, thanks for the reply. Quick answers below:\n\nBrand: BRYA. Website: thisisbrya.com (currently in build \u2014 happy to share Instagram\/landing as a backup if useful).\n\nLocation: United Kingdom.\n\nProduct Category: Performance sportswear \u2014 4 garments (men's tee + shorts, women's tee + shorts) in our debut Genesis Set.\n\nDesigns: Complete tech pack ready, will share once basic capability is confirmed.\n\nQuantities: 30\u201350 units per garment per colourway, 4 colourways, 4 garments = ~480\u2013800 units total Run 1. Scaling on subsequent drops.\n\nTimeline: Production complete by early September 2026 for 17 October launch.\n\nTarget Price: Open to your indicative pricing \u2014 happy to discuss our retail target if helpful.\n\n\nIf you can also forward my original questions to a production engineer (in particular: in-house laser cutting capability for full-fabric perforation + mesh, and silicone rubber trim work for the women's tee B-flap), I can get you the tech pack quickly and we can move to sampling.\n\nBest, Tai\n\n\n\nBRYA\n\n\nElevated performance wear\n\nDesigned for movement\n\n\n\nthisbrya.com\n\n\n\n\n\n\n\n\nFrom: Matilde Azevedo \nTo: \nDate: Thu, 30 Apr 2026 11:45:10 +0100\nSubject: Re: Manufacturing Enquiry \u2014 BRYA Performance Sportswear (UK Brand, Oct 2026 Launch)\n\n\n\nHello Tai,\n \n Thank you for contacting us. \n \n To provide you with an accurate quotation for your project, I need the following details:\n \n 1. Brand: Do you have an established brand? If so, please provide the Name and Website.\n 2. Location: What is your country?\n 3. Product Category: What type of product do you want to develop (e.g., T-shirts, Shorts, etc.)? This is essential to apply the correct minimums.\n 4. Designs: Do you have a Tech Pack or a Physical Sample to send us?\n 5. Quantities: What is the total quantity and how many styles?\n 6. Timeline: What is your desired delivery date?\n 7. Target Price: What is your target production price per style?\n \n Once I have these details, I can better assess your project and guide you on the next steps. \n \n Looking forward to your response!\n\n Os melhores cumprimentos \/ Best regards,\n\nMatilde Azevedo\n\nCommercial Assistant\n\ntel: tel:+351915085106 \n email: mailto:matilde@portugaltextile.com \n address: Rua da Zona Industrial de Alto de Pega 105 Loja F, 4480-761 Vila do Conde\nhttps:\/\/www.absolutarget.com\/ \nhttps:\/\/www.portugaltextile.com\/ \nhttps:\/\/www.portugalshoes.com\/\n\n$$SYSTEM NOTE: The user provided general web links (https:\/\/www.absolutarget.com\/, https:\/\/www.portugaltextile.com\/, https:\/\/www.portugalshoes.com\/). Use these for the Brand Website question. Do NOT assume they are Tech Packs unless explicitly stated by the user.$$",
            "role": "user"
        },
        {
            "content": "Hello Tai,\n\nThank you for your prompt response and for providing the details.\n\nI appreciate your interest in our capabilities. However, I must inform you that our minimum order quantities (MOQs) are strictly non-negotiable. For the performance sportswear category, the minimum is 200 units per style. Since your current target of 30\u201350 units per garment per colourway does not meet this requirement, I cannot proceed with your project under the current quantities.\n\nCould you confirm if you are willing and able to increase your order to meet the minimum quantities for your specific products? \n\nOnce I have this confirmation, we can discuss the next steps, including the tech pack and sampling.\n\nLooking forward to your reply!",
            "role": "assistant"
        },
        {
            "content": "Hi Matilde,\n\n\n\nThanks for the clarity.\n\n\n\n A 200-unit MOQ is above what our debut pre-order run can absorb \u2014 we're sized for 30\u201350 per SKU on Run 1, scaling to several hundred on Run 2 once pre-sale demand validates the volume. I'll keep you on file for the second drop in 2027 when the per-SKU numbers will be a closer fit. Best, Tai\n\n\n\nBRYA\n\n\nElevated performance wear\n\nDesigned for movement\n\n\n\nthisbrya.com\n\n\n\n\n\n\n\n\nFrom: Matilde Azevedo \nTo: \nDate: Thu, 30 Apr 2026 11:58:06 +0100\nSubject: Re: Manufacturing Enquiry \u2014 BRYA Performance Sportswear (UK Brand, Oct 2026 Launch)\n\n\n\nHello Tai,\n \n Thank you for your prompt response and for providing the details.\n \n I appreciate your interest in our capabilities. However, I must inform you that our minimum order quantities (MOQs) are strictly non-negotiable. For the performance sportswear category, the minimum is 200 units per style. Since your current target of 30\u201350 units per garment per colourway does not meet this requirement, I cannot proceed with your project under the current quantities.\n \n Could you confirm if you are willing and able to increase your order to meet the minimum quantities for your specific products? \n \n Once I have this confirmation, we can discuss the next steps, including the tech pack and sampling.\n \n Looking forward to your reply!\n\n Os melhores cumprimentos \/ Best regards,\n\nMatilde Azevedo\n\nCommercial Assistant\n\ntel: tel:+351915085106 \n email: mailto:matilde@portugaltextile.com \n address: Rua da Zona Industrial de Alto de Pega 105 Loja F, 4480-761 Vila do Conde\nhttps:\/\/www.absolutarget.com\/ \nhttps:\/\/www.portugaltextile.com\/ \nhttps:\/\/www.portugalshoes.com\/\n\n$$SYSTEM NOTE: The user provided general web links (https:\/\/www.absolutarget.com\/, https:\/\/www.portugaltextile.com\/, https:\/\/www.portugalshoes.com\/). Use these for the Brand Website question. Do NOT assume they are Tech Packs unless explicitly stated by the user.$$",
            "role": "user"
        },
        {
            "content": "Hello Tai,\n\nThank you for your understanding and for sharing your plans for future drops. I appreciate your interest in our capabilities, and I completely understand the constraints of launching a new collection.\n\nPlease feel free to reach out when you are ready for your second drop in 2027, and we can explore potential collaboration at that time. \n\nWishing you the best of luck with the launch of The Genesis Set!\n\nBest,",
            "role": "assistant"
        }
    ],
    "client_name": "BRYA",
    "language": "English",
    "context_type": "textile",
    "report_sent": false,
    "history_archive": [],
    "project_details": {
        "product": "Pending",
        "quantity": "Pending",
        "price": "Pending",
        "timeline": "Pending",
        "requests": "None",
        "brand_name": "BRYA",
        "brand_website": "Not Specified",
        "country": "United Kingdom",
        "phone": "+447852 575 419",
        "brand_type": "Start up",
        "client_name": "Tai Bryan"
    },
    "last_processed_uid": 100545,
    "retry_count": 0
}